Adding some function with the help of TIde Oxi

Despite the unexpected delay, my project is finally ready for it's big reveal!!!

I was recently chosen by the good people at P&G to be one of 50 bloggers to put the new Tide OXI Multi-Purpose Stain Remover to the challenge. If you haven't heard of of this stuff, you're in luck, because I'm about to give you your first glimpse of its capabilities!

For the challenge, I was given a Home Depot gift card to purchase the product; and since I knew I didn't want to just do a  a product review, I used the remaining balance of the card to purchase a few more supplies that I needed for my project.

For a long time, I've realized that we hadn't been using our entry way to its full potential. Despite not actually having an entry way, I knew and could add some function to this lack-luster space.

You'll see our front door, which opens up directly into the living room, to the right. The wall that you see, is actually, a wall of our dining area. This was the perfect spot for me to try out some simple floating shelves to help bring some function to the area. 

After a little painter's tape placement, I finalized my shelf size and location.

 I didn't have a lot of money left over for materials, so I thought of a solution that would give me sturdy shelves that required the least amount of lumber. One 2 x 10 x 16 piece of lumber was all I needed! I had my piece cut down into four 40" pieces.

After locating three studs in my wall, marking their locations on my boards, and then using my Kreg jig to drill in some pocket holes, I gave the boards a good sanding and they went up on the walls in no time!

Once up, I prepped them for paint with a little frog tape.

 Once prepped, I gave them each a coat of primer and two coats of glossy white paint. (If I was a little more patient, I would've painted them before hanging them...only because getting the tape from behind them was a pain.) And after letting them dry for about 24 hours, I jumped right into styling!

I added a white vase to act as a mail catcher and brought in a tray and one of our elephant hooks for keys and loose change.

I'm still on the hunt for a pair of stools or ottomans to go under the last shelf, but I couldn't be happier with how they turned out! Now, what I could be happier with was our carpet. Enter Tide OXI Multi-Purpose Stain Remover!

With it being our entry/dining area, it had more than seen better days.

I grabbed a bucket and a couple cleaning rags and dissolved a scoop of Tide OXI in about a gallon of warm water. I used one rag to dip into the Tide OXI solution and scrub the stained areas. Then, I used the clean, dry rag to blot it up. Pretty simple process and it gave pretty awesome results.

This stuff has over 200 household uses, from cleaning carpet to hard surfaces; so, whatever your problem, this is a great solution. Just simply follow the instructions on the back of the tub.

I was pretty excited about the carpet results, so I threw a little in with a load of whites. In this load was a pair of my 5 year old's all white sneakers.

Here they are before:

And here they are after:

The test is always in the laces, and I definitely give props to Tide OXI for killing it in this challenge! 

So, what do you guys think? Willing to give Tide OXI a try?
This is a sponsored post. P&G provided me with a Home Depot gift card to purchase this product and other supplies, but all opinions and photos are 100% my own.

P.S. I'll be back next week with a few posts on the DIY artwork you see above!